| Nyont | Specifications Model AC/DC 02/2000 | Rev4, 01/08/02 |
| FUNCTlON: | Duct pressure monitor for constant volume air extraction systems |
| MAXlMUM PRESSURE: | O. 5 PSl |
| FlELD ADJUSTABJLlTY: | Single point calibration |
| OPERATlNG/ADJUSTMENT RANGE: | 0.05′ to 2″ water column (+l- 0.02″WC) |
| OPERATING POSITION: | Diaphragm vertical |
| OPERATlNG/STORAGE TEMP: | -40 Degreeto 990 Degree F/-40 to 88 Degree C |
| POWER REQUiREMENT: | 12-24 VDC or VAC +/- 10%, 3W |
| ALARM OUTPUT: | Dry contact (NO): Max 1.0 amp @ 24VDC |
| ALARM lNDlCATlONS: | Flashing visible red LED Audible alarm 75 dB at 4″ – approximately 2000 Hz resonance |
| NORMAL lNDICATIONS: | Constant visible green LED (primary power on) |
| OPERATOR CONTROLS: | Push test button for armed system check Push to silence audible alarm with automatic reset Arm/disarm (on/off) switch for alarm circuit Remote on/off control |
| LlFE CYCLE: | UL rated pressure differential switch at 100, 000 on/off cycles UL # NH11121, CSA # LR45785 |
| DUCT CONNECTlON: | Combination barbed type for use with flex plastic or rubber tubing |
| DlMENSlONS: | H 6.4″, W 5.25″, D 2.5.0″ Shipping weight 2.2 /b. |
| WARRANTY: | Four (4) year full replacement warranty |
| APPROVALS: | CSA Std C22.2 No. 205 – M1983 Signal Equipment CSA Std. Z316.5-94 – fume Hoods and Assoc. Exhaust Systems UL Std No. 464 – Audible Signal Appliances |
| OTHER REQUlREMENTS: | Optional housing finish brushed stainless steel Standard painted steel housing finish lndividually boxed end bulk packed Optional custom label silk screened on housing Transformer not included |
